Twi Transport Warning Interface - Jonsered 1250RZ Operator's Manual

High boom warning
If the 1st boom is in parked position the symbol will change
from (5) to (6) and it is safe to move the vehicle.

7.3. TWI Transport warning interface

WARNING
If you switch off the control system when
manual operated stabiliser extensions/tiltable
stabiliser legs are not locked in the transport
position, and/or if the first boom angle
exceeds a certain specified angle, the
indicator lamps for both the cylinders and the
hoist will flash red for a while.
The vehicle must not be moved.
• A warning, visible and audible from the driving position
for transport, indicates when the crane height exceeds a
predetermined maximum and when the manual operated
stabiliser extensions/tiltable stabiliser legs are not locked
in the transport position.
• The audible warning
acknowledgement button [option] or by a signal
indicating that the parking brake of the vehicle is
engaged.
The vehicle must not be moved
1. Switch the system on and operate the crane into transport position.
2. Switch off the system. The vehicle may be moved.
DANGER
After use always put the crane into the transport position! When you have to park
the boom on the load bed, or over the load, secure the boom and the lifting
accessories to prevent any unintentional movement of the crane and the lifting
accessories.
End the system
Ending crane operation
can be silenced
Jonsered 1250RZ -1500RZ safety+R CE
by an
49