Bleeding Air From The Hydraulic System; Troubleshooting; Main Fuses- Column Box - Jonsered 1250RZ Operator's Manual

Table of Contents

Advertisement

2. Operate the crane to parking position.
3. Check and top up the oil tank to max level on the tank gauge.
4. Bleed the system.

8.5.6. Bleeding air from the hydraulic system

Bleed the air from the hydraulic system:
• after changing the hydraulic oil
• after working on the hydraulic system
• if your crane works slowly or jerkily
• if your crane has not been used for a long time
WARNING
Air in the hydraulic system can lead to faults and damage
To bleed the air from the hydraulic system, proceed as follows:
1.
Slowly extend and retract each stabiliser extension to its end position at least two times.
2.
Slowly extend and retract each stabiliser leg to its end position at least two times.
3.
Set stabiliser system in working position and operate the crane out of parked position.
4.
Slew the crane slowly.
• If your crane has a rack-and-pinion slewing system, slew the crane in each direction to the
slewing stop at least twice.
• If your crane has a continuous slewing system, slew at least two complete rotations.
5.
Slowly raise and lower the 1st and the 2nd boom to its end position at least twice.
6.
If the crane is equipped with JIB, slowly raise and lower the JIB at least twice with main boom
system pointing downwards and upwards.
7.
Slowly extend and retract the boom extensions to their end position at least twice.
a.
If your crane is equipped with JIB, extend and retract the 2nd boom extensions with the
JIB pointing almost vertically upwards and downwards.
b.
Slowly extend and retract the JIB extensions to their end position at least twice.
8.
Slowly operate each hydraulically operated add-on equipment such as hoist, grapple, pallet
fork, etc. to their end position at least two times.
9.
Check the oil level in the tank and top up if necessary.

8.6. Troubleshooting

8.6.1. Main fuses- Column box

Remove the cover on the coulmn box to access the fuses.
F110A
F220A
F33A
F4, F5 5A
66
Maintenance and Service
Jonsered 1250RZ -1500RZ safety+R CE
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
F1 F2 F3
F4
F5

Advertisement

Table of Contents
loading

This manual is also suitable for:

1500rz

Table of Contents