Jonsered 1250RZ Operator's Manual page 30

CAUTION
• Operate the crane using smooth and gentle lever movements.
• If a cylinder is at its end position, free the operating lever. Otherwise overheating
can occur.
Safety when ending crane operation
DANGER
Always end crane operation as follows:
• After use, always place the crane in the transport position!
• When you have to park the boom on the load space or over the load; secure the
boom and the lifting accessories to prevent any movement of the crane and the
lifting accessories.
• Withdraw the stabiliser legs and stabiliser extensions.
• Lock tiltable stabiliser legs and manual operated stabiliser extensions in
transport position.
• Check that the locking mechanisms are properly locked.
• Switch off the operating system.
• Disengage the PTO or power supply after work.
• If you drive with the PTO or power supply engaged, this will cause serious
damage to the PTO/gearbox combination.
DANGER
For cranes with cabin:
• Make sure that the cabin is in lower position.
• Close all windows and both doors.
• Pull down the protecting curtain to protect the front door .
Only after doing the above, should you drive the vehicle away.
30
Safety precautions and warnings
Jonsered 1250RZ -1500RZ safety+R CE