Canon PowerShot S50 User Manual page 167

The following messages may appear when the camera is connected to the Direct
Print compatible Bubble Jet Printer.
On Bubble Jet printers with operation panels, check the error number
displayed on the panel and refer to the Bubble Jet Printer Quick Start
Guide.
(The message or error code may not display with some models.)
Printer in use:
Printer warming up:
No print head:
Printer cover open:
Media type error:
Paper lever error:
Low ink level:
Waste tank full:
Printer error:
The printer is printing the data from the memory card
inserted in the computer or printer. The printer
automatically starts printing the images from the
camera after completing the current printing.
Printer is warming up. When it is ready, the printer
starts printing automatically.
No print head is installed in the printer.
Close the printer cover securely.
You selected a paper type incompatible with the
printer. Select a compatible paper type in the Print
Style menu.
Adjust the paper thickness lever to the proper position.
The ink tank needs to be replaced soon. Prepare a
new ink tank. If you select [Continue] in the error
screen, you can restart printing.
(This message may not display with some models.)
You can restart printing by pressing the RESUME/
CANCEL button on Bubble Jet Printer. Please request
replacement of the waste tank at your nearest Canon
customer support center listed in the Contact List
provided with the Bubble Jet Printer or in the Bubble
Jet Quick Start Guide.
Turn off the printer, then turn it on again. If the error
persists, please consult your nearest Canon customer
support center listed in the Contact List provided with
the Bubble Jet Printer or in the Bubble Jet Quick Start
Guide.
161