Setting The White Balance - Canon PowerShot S50 User Manual

Setting the White Balance

When the white balance mode is set to match the light source, the camera
reproduces colors more accurately.
Auto
Daylight
Cloudy
Tungsten
Fluorescent
Fluorescent H For recording under daylight fluorescent, or daylight fluorescent-type 3-wavelength fluorescent lighting
Flash
Custom1
Custom2
1
Press the
2
Select * (Auto) using C or D on the
multicontroller.
* The current setting is displayed.
3
Select the desired setting using B or A
on the multicontroller.
• Please see the next page regarding the
custom setting.
• You can shoot the image right after selecting settings by pressing the shutter
button. This screen will appear again, once the image in shot.
4
Press the
5
Shoot the image.
The white balance cannot be adjusted when the photo effect is set to
(B/W).
80
Settings are automatically set by the camera
For recording outdoors on a bright day
For recording under overcast, shady or twilight skies
For recording under tungsten and bulb-type 3-wavelength fluorescent lighting
For recording under warm-white, cool-white or warm-white (3-wavelength) fluorescent lighting
For flash photography
For setting a custom value with a white sheet of paper, etc., to obtain the optimal white balance
for the conditions. There are two custom values: custom1 and custom2.
/ /
/ /
button.
button.
(Sepia) or