Continuous Shooting - Canon PowerShot S50 User Manual

Continuous Shooting

Use this mode to shoot successive frames while the shutter button is fully pressed.
Standard
Continuous Shooting
High Speed
Continuous Shooting
1
Press the
2
Select * (Drive mode) using C or D on
the multicontroller.
* The current setting is displayed.
3
Select or
button.
4
Press the shutter button halfway to lock the focus.
5
Press the shutter button all the way to shoot.
• Shooting will stop when the shutter button is released.
• The shooting speed is as follows.*
When is selected: Approx. 1.5 frames per second
When is selected: Approx. 2.0 frames per second
* Large/Fine, LCD monitor off mode. (These figures reflect Canon's testing standard. The actual figures
will vary according to the shooting conditions and settings.)
• Some settings are not available with certain Shooting modes. Please refer to
Functions Available in Each Shooting Mode (p. 180)
• The interval between frames may lengthen somewhat when the internal memory
becomes full.
• The flash can be used, but the interval between images will lengthen to
accommodate the flash recharge time.
66
Use this mode to view the images as you shoot continuously. The
shutter interval is longer in this mode than in
Use this mode to shoot continuously with a short shutter interval.
You cannot check images while shooting continuously.
/ / button.
and press the / /
mode.