Canon PowerShot S50 User Manual page 149

3
Select images for transferring.
Single Images
• Select an image using B or A on the
multicontroller and mark or remove marks from
images using C or D on the multicontroller.
• You can use the same procedures to select images in
index replay (3 images). Press the
switch between single replay and index replay.
All the Images on a CF Card
• Press the button to switch to index replay (three
images).
• Then press
on the multicontroller and press
select [Clear All] instead of [Mark All], you can
remove marks from all the images.)
• You can mark or remove a mark from each
image after marking or removing marks from all
the images.
4
Press the
The selection mode will turn off and the Transfer Order menu will reappear.
• Images are transferred in order from oldest to newest by the shooting date.
• A maximum of 998 images can be marked per CF card.
button to
, and select [Mark All] using C or D
button.
again. (If you
143