Canon PowerShot S50 User Manual page 100

Switching between the Built-in Flash Adjustment Settings (continued)
Compensating the Flash Output.
In mode or when [Flash Adjust] is set to [Manual], the flash output can be
controlled in three steps, starting from FULL, when shooting. This setting is also
active with slave flash photography where multiple flashes are fired at the subject
from different positions because the pre-flash does not fire.
1
Press the
2
Select (Flash Output) using C or D on
the multicontroller.
3
Adjust the compensation using B or A
on the multicontroller.
You can shoot the image right after selecting
settings by pressing the shutter button. This
screen will appear again, once the image is shot.
4
Press the
5
Shoot the image.
Some settings are not available with certain Shooting modes. Please refer to
Functions Available in Each Shooting Mode (p. 180).
94
/ / button.
/ / button.
e.g. Flash Output