Canon PowerShot S50 User Manual page 82

Selecting an AF Frame (continued)
• Some settings are not available with certain Shooting modes. Please refer to
Functions Available in Each Shooting Mode (p. 180)
• Turn the LCD monitor on to set the AF frame to the position you desire before
shooting.
• The AF frame is locked to center-point when using the digital zoom.
• When the Spot AE Point is selected as the light metering mode, you can use the
selected AF frame as the Spot AE Point (p. 77).
• When the AF frame is set to manual selection, it will move to the center if you
continuously press
• For an explanation of the AF frame colors, please refer to page 33.
• If the Shooting mode is changed, the AF frame may also change depending on
the Shooting mode. See the table below.
Initial Shooting Mode
P Tv Av M
P Tv Av M
If you switch to
saved with the [Save Settings] function. When switching to any other
Shooting mode, the AF frame settings will change to the settings of the
mode you switched to.
Regarding the AF Frame
AiAF* has a wide range of measuring for accurate focusing. AiAF focuses on the
object even if it is not exactly in the center of the frame.
* "Ai" stands for "Artificial intelligence" and "AF" stands for "Auto Focus."
76
.
Next Shooting Mode
P Tv Av M
P Tv Av M
mode, the AF frame will change to the setting previously
AF frames after
change
Auto Selection
No change
Auto Selection
Center-Point