Motor Housing - Hunter 5954-C54CFLK Instructions Manual

Motor Housing

Keyhole
Lift the motor housing and align the keyholes
in the motor housing with the two partially
installed canopy screws in the hanger
bracket. Rotate the fan housing to situate the
screws in the end of the keyholes. The motor
housing is not secured until the next step is
complete. Do not leave unattended.
Motor
Housing
Screw
Keyhole
Install the two remaining motor housing
screws, found in the
through the screw holes in the motor
housing and hanger bracket. Tighten all
four screws securely. Install the motor
housing plugs, found in the
bag, into the holes to cover the screws.
M0129-01 • 09/21/16 • © 2016 Hunter Fan Company
Motor
Housing
Plug
Motor
Housing
Screw
hardware bag,
hardware
9
www.HunterFan.com
1.888.830.1326
Note: Fan style may vary.