Advertisement
Step 10
A23et ctr
(8)
The gables go on top of the front and
rear walls to support the roof beams.
NOTE
The gables are packed nested
together and might be mistaken
as one piece. Carefully separate
them before continuing.
1
Apply edge trim to the top edge
of the right gables and left gables.
2
Attach the four roof beam
brackets to the gables using two
bolts, washers and nuts.
NOTE
Mounting leg of bracket must
face toward center of gable
and holes closest together
must be on top
CAUTION:
To avoid mishap on the sharp
edge the edge trim must remain
in place on the top edge of the
gable until right and left roof
panels are in place.
Parts Needed For
Gable Assemblies
Edge Trim
(Plastic Piece)
6000
5971
Roof Beam
Brackets
STEP
2
23
6000 Right Gable (2)
6001 Left Gable (2)
5971 Roof Beam Bracket (4)
STEP
1
Washer
6001
Advertisement
