Table of Contents
Advertisement
Before you begin
The systems must be removed from the rails for servicing.
CAUTION:
or
The weight of this part or unit is between 18 and 32 kg (39.7 and 70.5 lb). It takes two persons to
safely lift this part or unit. (C009)
Notes:
v When you slide a system out of a rack, ensure that all stability plates are firmly installed to prevent the
rack from toppling. Slide only one system out at a time.
v When the rails are fully extended, the rail safety latches lock into place. This action prevents the
system from being pulled out too far.
Procedure
1. Label and remove all cables from the rear of the system.
2. Remove the front screws that secure the system to the rack from both sides of the system as shown in
Figure 84.
Figure 84. Removing the front screws and removing the system from the rack
3. Pull the system unit out of the rack.
or
Common procedures for servicing or installing features in the 8001-12C or 8005-12N
83
Advertisement
Table of Contents
