2.5
Encrypting the Camera Image in Transport
Mode
The camera can encrypt images using IPsec transport mode.
Note
•
If you use IPsec, the refresh interval increases.
1.
Click [IPsec] on the Setup page.
2.
Click Camera in the Transport column.
•
If you use transport mode for E-mail or FTP transfer, click No. in the Buffer/
Transfer column.
Set to use
Alarm Log.
(See page
124)
Set up these settings to transfer images in transport mode (see page 118).
Note
•
To display an Alarm Log, set Alarm 1, Alarm 2 or Motion Detection for the
Trigger Setting and check [Enable].
3.
Enter each parameter in the relevant data field.
Operating Instructions
The display shows
that the
communication is
in HTTP and
anyone can
access the
camera if they
have the pre-
shared key.
50