Advertisement
3.Execute update
(1)Disconnect the USB cable, and remove Everio from the PC.
* In about 30 seconds after the removal, the update start screen appears.
(2)When the displayed current version is an old one, select "YES", and then press (OK).
(3)When the displayed current version is an old one, select "YES", and then press (OK).
* It takes about 4 minutes and 30 seconds to complete the update.
(4)Select "OK", and then re-start Everio.
(5)After the re-start, check that the current firmware is updated in UPDATE.
MENU > BASIC SETTINGS > UPDATE
When the updated firmware version is confirmed, select "NO", and then press (OK).
The firmware update is completed.
1-8 (No.YF335<Rev.001>)
Fig.2-2-5
Fig.2-2-6
Fig.2-2-7
Fig.2-2-8
Advertisement
