Advertisement
2.3
FIRMWARE UPDATE
Connecting Everio to a PC via USB cable enables firmware update.
Connect a battery, capable of operating for 30 minutes or longer, and an AC adapter to Everio for update.
* The following procedure shows the monitor displays of the firmware update from ver. 0.82 to ver. 1.55.
* Use Windows XP or Windows Vista.
1.Preparation
(1)Preparation
Download the firmware update application software from JS-NET.
(2)Connection
Connect a battery that is capable of operating for 30 minutes or longer and an AC adapter to Everio.
* To ensure secure power supply during the update, update is disabled if either of them is not available.
2.Firmware transfer
(1) Select "UPDATE" in the main menu of Everio.
MENU > BASIC SETTINGS > UPDATE
(2)When the displayed current version is an old one, select "YES", and then press (OK).
(3)Follow the directions on the monitor to connect Everio to the PC via USB cable.
1-6 (No.YF335<Rev.001>)
Fig.2-2-1
Fig.2-2-2
Fig.2-2-3
Advertisement
