Scanning and sending via SMB/FTP
You can scan an image and send it to a total of three destinations via SMB or FTP.
To scan and send an image to a server, you need to set up network
parameters using the control panel or SyncThru™ Web Service (see "Setting
up an FTP/SMB server" on page 134).
6
Understanding the Scan to Server screen
Press Scan to Server in the display screen.
Basic tab
•
File Name: Makes the file name for the file to be sent.
•
File Format: Select the file format before you proceed with the scanning
job.
•
Recent: Shows the latest email addresses used. Also, you can choose email
addresses instead of pressing the pop-up keyboard (see "Resending to the
last email address" on page 130).
•
Resolution: Selects scanning resolution value.
•
Darkness: Adjusts the degree of darkness of scanned output.
132
7. Scanning