Table of Contents
Advertisement
Sending a fax
9
Sending a fax using speed dial numbers
When you are prompted to enter a destination number while sending a fax,
enter the speed dial number you set previously (see "Setting up an Address
Book" on page 169).
1
Place the originals face up in the DSDF or place a single original face
down on the scanner glass and close the DSDF (see "Loading originals"
on page 64).
2
Press Fax from the display screen.
3
Adjust the document settings in the Advanced or Image tab (see
"Adjusting the document settings" on page 163).
4
Press the Basic tab.
Select Resolution.
5
When you press the input line from display screen:
6
•
For a one-digit (0-9) speed dial number, press and hold the
corresponding digit button using the numeric keypad on the control
panel.
•
For a two- or three-digit speed dial number, press the first digit
button(s) and then hold down the last digit button using the
numeric keypad on the control panel.
Press
(Start) on the control panel.
7
The machine starts to scan and send a fax to the destination.
155
8. Faxing
Advertisement
Table of Contents
