Adjusting The Volume Of Each Speaker Speaker Level Adjustments - Panasonic SC-HT640W Operating Instructions Manual

Adjusting the volume of each
speaker: Speaker level adjustments
This is one of the ways to get appropriate surround effects.
Preparation
Press [DVD].
1
While stopped and no on-screen display is shown
Press and hold [—TEST] to output a test signal.
≥ To stop the test signal, press and hold [—TEST] again.
L: Front left
RS: Right surround
≥ There is no output from SW (subwoofer) channel.
2 Press [VOLUME, r] or [s] to set the volume level
normally used for listening.
3
Press [3] (increase) or [4] (decrease) to adjust the
speaker level for each speaker.
≥ Adjust the speaker levels to the same level as the front speakers.
C, RS, LS: `6 dB to i6 dB
∫ To adjust speaker level during play
[Effective when playing multi-channel audio or when Dolby Pro
Logic II or Sound Field Control (MOVIE, SPORT or MUSIC) is on,
and Surround Music is off.]
1 Press [CH SELECT] to select the speaker.
# # # #
L C R RS
^-----------------------------------------------------}
SW: Subwoofer
≥ You can adjust SW only if the disc includes a subwoofer
channel.
≥ "SW" does not appear on the display and is not adjustable
when "ÎPLII" is lit.
≥ "S" appears on the display when "MOVIE", "SPORT" or
"MUSIC" is selected with Sound Field Control (➜ page 26).
In this case, you can adjust both surround speaker levels at the
same time using [3, 4].
S: `6 dB to i6 dB
2 Press [3] (increase) or [4] (decrease) to adjust the speaker
level for each speaker.
C, RS, LS, SW: `6 dB to i6 dB
(L, R: Only the balance is adjustable.)
≥ To adjust the balance of the front speakers, while "L" or "R" is
selected, press [2, 1].
C: Center R: Front right
LS: Left surround
#
LS SW
27