Displaying Current Playback Condition; Playing Cds Sequentially - Panasonic SC-HT640W Operating Instructions Manual

Convenient functions
1 5
Numbered
buttons
DISC
QUICK OSD
Checking the disc type in each
tray
You can select the disc after checking the discs loaded with the Disc
information screen.
≥ You can also select the disc directly with the 5 DISC SELECTOR
buttons on the main unit.
1
Press [DISC] to show the Disc information screen.
≥ To exit the screen, press [DISC].
2
Press the numbered buttons ([1] – [5]) to select the
disc.
14
CANCEL
PLAY
ENTER
PLAY MODE,
CD MODE
e.g.
Disc Information
DVD-Video
Track 10
CD
DVD-Audio
Unchecked
No Disc
Empty
Not yet read
Displaying current playback
condition
Press [QUICK OSD].
≥ To exit the screen, press [QUICK OSD].
e.g. [DVD-V]

Playing CDs sequentially

[VCD] [CD] [WMA] [MP3]
This feature is very convenient if you want to play several music CDs
sequentially. Make sure that applicable disc is in the play position before
playing (➜ Checking the disc type in each tray, left).
While stopped
1
Press and hold [—CD MODE].
2
Press [1 PLAY].
≥ If all loaded discs are DVDs or if other discs are unchecked, CD Mode
does not work.
≥ HighMAT menus and Video CD playback control are disabled.
≥ You cannot turn CD Mode on or off during program or random play.
≥ If you want to play a DVD, press and hold [—CD MODE] again to cancel
CD Mode. (CD Mode is also canceled when you switch the unit to
standby, select another source, or change the disc in the play position.)
≥ DVD and JPEG are skipped without being played.
Time 1:15
Current playback number Elapsed play time
1 4
Chapter
Title
Playback
condition
Program Playback
Play mode Current position
PL PRG
D DTS
MODE
RDS
DVD
PTY PS A AC
0:41:23
Time