Enhancing The Stereo Sound: Dolby Pro Logic Ii; Adjusting The Volume Of Each Speaker: Speaker Level Adjustments - Panasonic SC-PT350W Operating Instructions Manual

Dvd home theater sound system
Hide thumbs Also See for SC-PT350W:
Table of Contents

Advertisement

Using sound effects (continued)

Enhancing the stereo sound: Dolby Pro Logic II

Dolby Pro Logic II is an advanced decoder that
derives 5-channel surround (Left and Right
Front, Center, Left and Right Surround) from
stereo sound sources, whether or not it has been
specifi cally Dolby Surround encoded.
Movie : Movie software, recorded in Dolby
Surround.
Music : Stereo sources
Off
: Cancel
• This works only in DVD/CD, USB and Digital In
mode.
• "ŸPL II" lights when there is an effect.
• This does not work when audio is output from
HDMI AV OUT terminal.
Adjusting the volume of each speaker:
Speaker level adjustments
This is one of the ways to get appropriate
surround effects.
Preparation
1
While stopped and no on-screen display is
shown
To output a test signal.
L: Front left
R: Front right
LS: Left surround
• There is no output from SW (subwoofer)
channel.
2
To set the volume level normally used for
listening.
3
To adjust the speaker level for each speaker.
OR
• Adjust the speaker levels to the same level
as the front speakers.
C, RS, LS: −6 dB to +6 dB
To stop the test signal
Press [TEST] again.
32
RQT8043
RQTX0059-B_Out_new6.indd 32
RQTX0059-B_Out_new6.indd 32
C: Center
RS: Right surround
To adjust speaker level during play
[Effective when playing multi-channel audio or
when Dolby Pro Logic II is on.]
1. Press and hold [−CH SELECT] to select the
speaker.
L
C
R
RS
LS
SW: Subwoofer
• You can adjust SW only if the disc includes a
subwoofer channel.
• "SW" does not appear on the display and is
not adjustable when "ŸPL II" is lit.
• "S" appears on the display when "MOVIE",
"MUSIC" is selected with Super Surround
(\ page 31).
In this case, you can adjust both surround
speaker levels at the same time using [5, ∞].
S: −6 dB to +6 dB
2. Press [5] (increase) or [∞] (decrease) to
adjust the speaker level for each speaker.
C, RS, LS, SW: −6 dB to +6 dB
(L, R: Only the balance is adjustable.)
• To adjust the balance of the front speakers,
while "L" or "R" is selected, press [2, 3].
SW
3/5/07 3:27:13 PM
3/5/07 3:27:13 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents