Advanced Play; Displaying Current Playback Condition / Program And Random Play - Panasonic SC-PT350W Operating Instructions Manual

Advanced play

Displaying current playback condition
Functions Menu
■ Basics
Example:
Playback condition
■ Details
Example:
Audio information
Subtitle information
Angle information
Aspect of current title
Total play time of
current title
• Video and audio information is not
displayed during search.
Program and Random play
(during stop)
Program Random
To exit program or random play mode while stopped.
(several times)
• Selecting "Play as Data Disc" in Other Menu
(\ page 25) will be effective if the following functions
are not available to play WMA, MP3, JPEG, MPEG4
or DivX video contents.
• Some items cannot be played even if you
have programmed them.
20
RQT8043
Basics Details
(\ page 23)
Off (No on-screen display)
Current playback Elapsed
number play time
Play mode Current position
Off (Normal play)
Program play (up to 32 items)
1
Press the numeric buttons to select the item.
(
register the selection.)
Example:
• Repeat this step to program other items.
• To select a 2-digit number
Example: To select 12,
2
To select an item using the cursor buttons
Press [ENTER] and [5, ∞] to select an item, then press
[ENTER] again to confi rm.
To select all the items
While the "Chapter", "Track" or
"Content" fi eld is highlighted, press
[5, ∞] to select "ALL".
Then press [ENTER] again to
confi rm.
To change the selected program
1. Press [5, ∞] to select the program number.
2. Press the numeric buttons to change each item.
(
confi rm the selection.)
To clear the selected program
1. Press [5, ∞] to select the program number.
2. Press [CANCEL] (or press [5, ∞, 2, 3] to select
"Clear" and press [ENTER]).
To clear the whole program
Select "Clear all" with [5, ∞, 2, 3] and press [ENTER].
The whole program is also cleared when the unit is
turned off, the disc tray is opened or another source is
selected.
Random play
1
Press the numeric buttons to select a group
or title. (
[ENTER] to register the selection.)
Example:
2
Press [ENTER] to
Example:
Press [ENTER] to
Press