Tipper Aid - Invacare ReaFocus User Manual

Rea® Focus™
1. Loosen screws E on the brake attachment F.
2. Slide the brake attachment F forward or backward to
the desired position.
3. Re-tighten the screws.
5 mm allen key
Depth / angle adjustment
1. Loosen the handle D.
2. Loosen the screws C.
3. Adjust the depth and angle of the headrest.
4. Re-tighten the handle and the screws.
Positioning the headrest / neckrest to the front
This additional depth adjustment will move the
headrest another 7 cm forward.
D
C
A
You can also adjust the angle and depth by turning
the attachment for the headrest / neckrest.
1. Loosen the handwheel A.
2. Remove the headrest / neckrest.
3. Loosen the handle D.
4. Remove the screw and the handle.
22
C
D
A
5. Rotate the headrest / neckrest attachment pole including
the attachment E.
6. Return the headrest / neckrest to the attachment.
Note that the screw to the headrest / neckrest
attachment C and the handle D must be mounted
on the opposite side due to the groves in the screw
hole.
7. Return the headrest / neckrest to the attachment on
the backrest.
8. Re-tighten the handle D and the handwheel A.

4.5 Tipper aid

With the tipper aid, an assistant can tip the wheelchair more
easily, in order to navigate steps for example.
WARNING!
Risk of overturning
– Ensure that the tipper aid does not project
beyond the external diameter of the rear wheel.
1. Hold the wheelchair by the push handles.
2. Press the tipper aid with your foot and hold the
wheelchair in the tipped position until you have
overcome the obstacle.
4.6 Table tray
WARNING!
Risk of falling / injury
– The table must never be used as a replacement
for the posture belt.
WARNING!
Risk of tipping / injury
– Max load on the table: 8 kg
CAUTION!
Risk of discomfort / minor bruises
– Make sure that the elbows of the user
are placed on the table when pushing the
wheelchair. If the elbows protrudes from the
table while pushing the wheelchair, there is a
risk of discomfort or minor bruises.
The table tray can be adjusted both in depth and width, the
following sections will show the different possibilities.
1431580-C