G-Set Operation/Automatic Pump Down Operation Mode/Dehumidification On-A・Off Setting - Daikin LXE10E-A11 Manual

https://daikin-p.ru
3. G-SET OPERATION/AUTOMATIC PUMP DOWN OPERATION
MODE/DEHUMIDIFICATION ON-A・OFF SETTING
The energy consunption reducing operation during G-SET operation, automatic pump down operation
collecting refrigerant to the liquid receiver and dehumidification ON-A・OFF setting are executed.
All indication
light on
(for 3 sec.)
Starting
preparation
(for 18 sec.)
※
1
Current
indication
(Operation state)
MODE MODE
M M
G-SET operation /
Automatic pump
down operation /
Dehumidification
ON-A•OFF setting.
MODE
M
Pressing the
Dehumidification ON-A･OFF setting.
The set point can be set by using
Note: When the dehumidification ON-A ・ OFF is set to ON, G-Set operating mode will be skipped.
MODE
M
Press the key in current indication mode to go to G-SET operation /
Automatic pump down operation / Dehumidification ON-A･OFF setting.
※ After the automatic pump down is completed, the pump down status is
maintained until the power supply is turned off.
key changes the mode between G-SET operation and automatic pump down /
key or key.
6