Parallel Port Devices; Serial Port Devices; Usb Devices; Microphone - Fujitsu 735Dx User Manual

From the PC Card Properties Window:
3. Select the card to be removed and click
on the S t o p button.
4. Verify that the You can safely remove
your cardmessage appears.
5. If thedevice cannot be removed
message appears,save all files, close all
applications, and exit Windows 95 then shut-
off the power with the power switch.
(See Power Off on pages 24-25.)
C A U T I O N
If the PC Card has an external connector
and cable, do not pull on this cable when
removing the card.
U s e r I n s t a l l a b l e

PARALLEL PORT DEVICES

To connect a parallel interface device to the par-
allel port, be sure that the connector is the right
size and aligned,then push in until it is fully
seated. When it is seated tighten the hold-down
screws, one on each end of the connector.
(See Figure 1-9 on page 8.)

SERIAL PORT DEVICES

To connect an RS-232C device to the serial
port, be sure that the connector is the right siz e
and aligned,then push in until it is fully seated.
When it is seated tighten the hold-down screws,
one on each end of the connector. (See Figure 1-
9 on page 8.)

USB DEVICES

When installing a device on the USB Port, be
sure that the connector is the right size,aligned,
and fully seated. (See Figure 1-8 on page 7.)
C A U T I O N
Due to ongoing changes in USB technol-
ogy and standards not all USB devices
and/or drivers are guaranteed to work.
L i f e B o o k 7 0 0 S e r i e s f r o m F u j i t s u
F e a t u r e s

MICROPHONE

Make sure that your mono microphone is
equipped with an 1/8" (3.5 mm) mono mini-
plug. Make sure the plug is aligned and push it
into the jack until fully seated. (See Figure 1-8
on page 7.)
STEREO LINE IN DEVICE
Make sure that your stereo line in audio device,
a cassette recorder, for example,is equipped
with an 1/8" (3.5 mm) stereo mini-plug. Make
sure the plug is aligned and push it into the jack
until fully seated. (See Figure 1-8 on page 7.)

HEADPHONES

Make sure that your stereo headphones are
equipped with an 1/8" (3.5 mm) stereo mini-
plug. Make sure the plug is aligned and push
it into the jack until fully seated.
(See Figure 1-8 on page 7.)
P O I N T
Plugging in headphones disables the
built-in stereo speakers.
105