Problem
T r o u b l e s h o o t i n g
Possible Cause
5. Power switch is already in the On position.
6. There is no battery installed and there is no
Power adapter (AC or auto/airline) installed.
7. The primary battery is installed but is faulty,
there is no optional second battery installed
and there is no Power adapter
(AC or auto/airline) installed.
L i f e B o o k 7 0 0 S e r i e s f r o m F u j i t s u
Possible Solution
5. Try the Suspend/Resume button. If that
doesn't work,slide your power switch firmly
to the front,pause 10 seconds or more and
then firmly to the rear. If you shut down
your notebook from Windows 95, you are
really in a pseudo-off state,there is some
power on and you can restart with the
Suspend/Resume button.
(See Power Off on pages 24-25.)
6. Use the Status Indicator panel to verify the
presence and condition of the batteries.
(See Figure 2-3 on page 20. ) Install a Power
adapter or install a battery in one of the
Multi-function bays in the front of your
notebook. (See Multi-function Bay Devices
on pages 97-100.) If the battery is not charged
use a Power adapter until it is charged.
7. Use the Status Indicator panel to verify
the presence and condition of the batteries.
(See Figure 2-3 on page 20.) If a battery is
indicating a short, remove that battery and
perate from another power source or replace
that battery.
129