Parallel Port Devices - Fujitsu Lifebook E342 Manual

Fujitsu lifebook e342: user guide

Table of Contents

Installing a PC Card

1. See your PC Card manual for instructions on

installation of that speciﬁc card.

2. Make sure that there is not already a PC Card

in the slot. If there is, eject it, as described in

Removing PC Cards.

3. Insert the PC Card in the card slot, with the

product name label facing up. (Figure 5-10.)

C A U T I O N

Some PC Cards can only be installed or

removed with the power in Suspend

mode, some only with power Off.

Please check the card documentation

for correct usage.

C A U T I O N

Installing or removing a card while your

notebook is in the process of going

through the power on or power off

sequence may damage the card and/or

your notebook.

U s e r

I n s t a l l a b l e

4. When the PC Card is fully inserted, the eject

button will pop out.

5. Flip this button toward the front of your

notebook to fold it out of the way.

6. When the card is installed, lock it in place

by sliding the Lock button toward the front

of your notebook. (Figure 5-10.)

C A U T I O N

Windows has a shutdown procedure for

PC Cards that must be followed before

beginning to remove a card.

Removing PC Cards

1. Shutdown operation of the card.

2. Click on the PC Card indicator on the

Windows taskbar.

3. Select the card to be removed and click

on the Stop button.

4. Verify that the You can safely

remove your card message appears.

L i f e B o o k E S e r i e s f r o m F u j i t s u

F e a t u r e s

5. If the device cannot be removed

message appears, save all ﬁles, close all

applications, and exit Windows then shutoff

the power with the power switch.

(See Power Off on pages 24-25.)

C A U T I O N

If the PC Card has an external connector

and cable, do not pull on this cable when

removing the card.