Table of Contents
Advertisement
Operation
6.2 Charging
6.2
Charging
Safety instructions during the charging process
Risk of electric shock and fire
Touching live parts may cause electric shock or even death. Defective connectors or cables
may cause fire.
• Do not kink or squeeze the charging cable. Do not draw the charging cable over sharp
• Do not use the Wallbox if dangerous damage or tampering is visible. Inform the
• Grip the power plug to pull the charging cable out of the socket. Do not grip by the cable
• Never touch the mains plug with wet hands.
• Do not connect or disconnect any cables during a thunderstorm.
Risk of overheating and fire
Using unauthorized accessories increases the risk of fire due to overheating.
• Only use a charging cable approved for the vehicle.
• Do not use an extension for the connection between the Wallbox and the vehicle.
• Adapter and adapter cable are not permitted.
Risk of accident
Ensure that the charging cable does not block any escape route or constitute a tripping
hazard. In this case, the cable becomes an obstacle that can lead to injuries. The cable could
also be ripped out from the anchoring and cause damage to the vehicle or the Wallbox.
Basic procedure
Connect the vehicle and the Wallbox using a suitable cable. For a Wallbox with permanently
connected cable, insert this cable into the socket of the electric vehicle. After successful
authentication, the charging process is started automatically by the vehicle and displayed via
the Status LED. You have the option of preselecting a time delay and viewing the status via
the VersiCharge app. After the charging process ends, the device switches to "Ready" status
(LED display (Page 18)).
52
DANGER
edges or hot surfaces.
operator. Keep yourself and other persons away from the Wallbox.
itself.
DANGER
CAUTION
VersiCharge AC Wallbox IEC
Operating Instructions, 12/2021, A5E50366109-AA
Advertisement
Table of Contents
