4.10
Closing the Wallbox
Attach the protective cover for the electronics again (not in illustration). Check that the seal is
sitting correctly. Make sure that the cables are not pinched or bent when hooking the
Wallbox into the wall bracket. Lift the Wallbox from the wiring position and close the Wallbox
by placing the Wallbox onto the wall bracket. Secure the Wallbox against unauthorized
opening with the supplied M3x8 screw.
VersiCharge AC Wallbox IEC
Operating Instructions, 12/2021, A5E50366109-AA
Mounting / Installing / Connecting
4.10 Closing the Wallbox
37