Placing Cards - Canon DR-S130 User Manual

• If double-feeding occurs, turn on [Disable double-feed
detection] on the scanner's touch panel.
Or, clear the [Detect by Ultrasonic] check box in the [Error
Detection] tab on the scanner driver settings screen.
p. 71) Or, select the [Rapid recovery system] check box on the
[Others] tab on the scanner driver settings screen.

Placing Cards

When scanning cards, set the feed selection lever to Bypass mode
and then place one card at a time horizontally.
1
Set the feed selection lever to Bypass mode
2
Adjust the document guides to fit the width of the card to
be scanned.
3
(See p. 49)
(See
(See p. 40)
• Place the cards one at a time.
• When scanning cards, place them to be fed horizontally. If you
• When scanning cards, clear the [Detect by Ultrasonic] check box in
Up to 3 cards can be placed in the scanner at the same time if they
are not embossed. In such a case, set the feed selection lever to
Normal mode before scanning.
31
Place the card horizontally, with the reverse side facing
you, and the top of the card facing down.
CAUTION
place cards to be fed vertically, they may not be ejected properly,
and cards that get jammed may be damaged when you remove
them.
the [Error Detection] tab on the scanner driver settings screen.
p. 40)
Hint
(See