Placing Cards - Canon image Formula DR-C130 User Manual

Placing Cards

1 Switch the feed selection lever to
■ When scanning cards, make sure to set the feed selection lever
to (Bypass).
■ Place cards one at a time.
2 Place the card horizontally, with the reverse side facing
you, and the top of the card facing down.
Adjust the document guides to fit the width of the card. -
>"Feeding in the Normal Mode"
■ If you place cards to be fed vertically, they may not be ejected
properly, and cards that get jammed may be damaged when you
remove them. Be sure to place the cards horizontally.
(Bypass)