Canon DR-S130 User Manual page 103

Item Description
To specify a host to be accessed,
input its IP address or computer
Accepted
name. You can specify a maximum
hosts list
of 5. You can input up to 64
characters in each line.
Trap setting Select ON/OFF for trap setting.
To specify a host to be targeted for
trap setting, input its IP address or
Trap
computer name. You can specify a
destinations
maximum of 5. You can input up to
64 characters in each line.
User Setting
In the SNMP settings screen, enable the SNMP v3 support function
and click [User Setting] to open the page shown in the following
diagram.
Item Description
Register a new user. Click to open a dialog box
New for editing the various settings for a user.
Up to five users can be registered.
Default Value Item
Modify
None
Delete
ON
Detail info
Edit dialog box of user
None
Clicking [New] or [Modify] in the user settings screen opens the
following page.
Item
User name
103
Description
Change the settings of the selected user. Click
to open a dialog box for editing the various
settings for a user.
Delete the selected user.
Display the settings of the selected user. Click
to open a dialog box for browsing the various
settings for a user.
Description
Set a user name within 32
characters.
You can use single-byte letters,
numbers, hyphens, and underbars.
An error appears when you press
the [Apply] button if the name is
already being used or contains
illegal characters.
Default Value
None