Table of Contents
Advertisement
Useful operation (continued)
HT-X15H
ENGLISH
! To change the audio language (audio output)
During playback, you can change the audio language (audio out-
put).
1
Whilst a disc is playing, press
the SHIFT button and then the
AUDIO button.
2
Repeat step 1 to select the desired audio number.
When playing DVD, the language changes as follows:
Audio 1/3: AC-3 5.1 English
Audio 2/3: AC-3 2CH English
When playing super video CD, video CD, audio CD, MP3, WMA
and DivX , the sound changes as follows:
Mono Left
Mono Right
Stereo
Notes:
" The audio language on some DVDs may not be changed.
" For audio language and audio system, refer to the manual of the
disc.
" When you set the unit to the stand-by mode or replace the disc,
settings return to the default.
" The audio language of DivX files can be switched as MP3 files.
However, it may change like DVD ("Audio 1/3", "Audio 2/3",
"Audio 3/3"...) depending on the recording method.
E-31
! To brighten an image
1
During
SHIFT button and then the GAM-
MA button to select "ON".
Audio language information
"ON" and "OFF" will be switched by each press of these but-
tons.
2
Within 10 seconds, press the
Audio 1/3: AC-3 5.1 English
cursor ( or ) button to set the
level.
Level
OFF
1: Original <English>
ON
(Dolby Digital 5.1 ch Surround)
2: English
To restore the original brightness:
In step 1, select "OFF".
(Dolby Digital 2 ch Surround)
05/6/7
playback,
press
the
OFF
G
G
ON
Setting
Level
Setting
Normal image
ON
Brighter
Slightly brighter
ON
A lot brighter
HT-X15H(H)E4.fm
TINSZA064SJZZ
Advertisement
Table of Contents
