Main Unit Preparation - Sharp HT-X15H Operation Manual

Main unit preparation

HT-X15H
ENGLISH
Installation methods
Make sure to unplug the AC power lead before installing
the main unit or change the position.
The stand is attached to the main unit at the factory.
You can also place the main unit horizontally or mount it on the
wall without the stand.
(See page 66 for mounting it on the wall.)
Notes:
When attaching or removing the stand, place the main unit on
a cushion or soft cloth to avoid damage.
Remove the only specified screws. Malfunction may occur. Be
careful not to lose the removed screws.
Caution:
Do not change the installation direction when the main unit is
turned on. Disc may not be read or may be damaged.
E-15
Placing horizontally
1
Remove the 2 screws
and the stand.
Stand
2
Fix the removed screws.
3
Attach the included
button name label.
Note:
Attach the button name label carefully. It is difficult to peel off.
05/6/7 HT-X15H(H)E2.fm
Stand
Button name label
TINSZA064SJZZ