Table of Contents
Advertisement
How to Change the Settings of the Automatic Ice Maker
By using the buttons on the internal control panel inside the refrigerator compart ment, you can
switch the settings of the automatic ice maker.
When you make ice
using the automatic
ice maker
In winter or times when
you don't need ice
The machine settings will go back to "Standard" after a blackout or when removing or replacing the electric light.
Caution
Never put anything apart from water in the water supply container. (Liquid like juice, tea or hot water may cause machines to
breakdown distort shape. (Heat resistant to 50 C)).
Do not make ice by putting water into the ice case. The case may break.
The following cases result in damage to the automatic ice maker.
When the scoop is left in the ice storage.
Remove ice in the recess of the ice scoop, otherwise the ice scoop will be prevented from closing.
Slowly open and close the door of the separate compartment. If you do so swiftly, ice may overflow from the ice case and fall into
the freezer compartment.
R-Y6000J_R-Y5600J (E).indd 31
Light
"Large ice cube
making" button
Ice can be made just by putting water in the water supply
container. Once a certain amount of ice is made the
machine will stop automatically.
Light ON
Light OFF
(Continue)
Every time the "Large ice cube making" button
is pressed, the mode changes in the order of
"Large ice cube making"
"Standard ice cube making". You will know
the mode by the light and operation sound.
Automatic Ice
At the time of installation the setting will be on "Standard".
Stop
The light may flash when the mode is changed to "stop
ice making". The light will turn off automatically after
approximately 20 seconds (it is not abnormal).
20
"Stop Ice Making"
50°C
31
4/6/09 10:12:27 AM
Advertisement
Table of Contents
