Troubleshooting Guide - Kidde P4010ACSCO User Manual

4. Troubleshooting Guide

Trouble Condition Visual Indications
low Battery
Fault Mode
end of Unit life
end of Unit life Hush®
Mode (after push/
release test/Hush®
button during end
of life)
If you require further information please contact Product Support at 1-800-880-6788 or write us at:
Kidde, 1016 Corporate Park Drive, Mebane, NC 27302. Our internet address is www.kidde.com.
Audible Indications
Chirp every 60 sec, voice every
30 sec: "Replace alarm."
Voice stops after 5 mins.
Chirp every 30 sec.
Voice every 30 sec: "Error, see
trouble shooting guide"
Amber
After 5 mins: no voice message
LED
Double chirp every 30 sec.
blinks
First 5 mins: Voice every 30 sec:
"Replace alarm, press button to
every
temporarily silence." Voice stops
after 5 mins. After 7 days: Chirps
continue. Voice every 30 sec for
5
5 mins: "Replace alarm."
seconds
Voice "Temporarily Silenced."
End of Unit Life chirps silenced
for 24 hrs. (7 days after End of
Unit Life chirps begin, the chirps
cannot be silenced.)
Action:
*Remove, discharge, dispose unit, and replace as
soon as possible.
*See Cleaning Your Alarm section.
* Push Test/Hush® button once to attempt to reset
the unit .
*Red LED will blink out an error code (number of
blinks) when Test/Hush® button is push/released
once. Report the number of blinks to customer
service if needed.
* Push/release Test/Hush® button to temporarily
silence (see End of Unit Life Hush® Mode section
below)
* Remove, discharge, dispose unit, and replace as
soon as possible.
* Remove, discharge, dispose unit, and replace as
soon as possible.
* 7 days after End of Unit Life chirps begin, the red
LED will blink out an error code (number of blinks)
when Test/Hush® button is push/released once.
Report the number of blinks to customer service
if needed.
7