Arrow Storage Products BR108 Owner's Manual & Assembly Instructions page 20

Step 7
A20 ctr
(30)
The main frame pieces give rigidity to
the side walls and provide a surface
for attaching the gables which support
the roof.
1
Fasten the rear wall angle
assembly across the inside top of
the rear wall using screws.
2
Fasten the rear wall channel
assembly across the middle of the
rear wall using screws.
3
Fasten the side wall angles across
the inside top of the side panels using
screws. Side wall angles must overlap
rear wall angle in corners.
4
Fasten the side wall channel
assemblies across the middle of
the side panels using screws. Fasten
overlaps in rear corners with screws.
5
Fasten the door track assembly
(holes on top) across the top of the
front wall panels using screws. See
the fi gure.
NOTE
The wall channels behind the
front wall panels will be installed
in a later step.
 Parts Needed For 
(2)
Wall Angles
Must Face
Inside
Building
STEP
1
STEP
3
Frames
STEP
2
8839
9922
STEP
4
9366
20
 Door Track Assembly (1)
 Rear Wall Angle Assembly (1)
 Side Wall Angle Assemblies (2)
 Rear Wall Channel Assembly (1)
 Side Wall Channel Assemblies (2)
5986
9917
Long Leg
on Top
Opening
Facing in
Short Leg
on Bottom
STEP
5