Arrow Storage Products BR108 Owner's Manual & Assembly Instructions page 24

Step 11
A24 ctr
(20)
1
Lift and fasten a right and left gable,
under angle at corner, to the door
track and rear wall angle with screws.
Hint: On the rear gable, use a bolt
and nut at the overlapping rear wall
angle. On the front gable, leave out
2 screws closest to center gable leg.
2
Join the left and right gables
together with a gable brace using a
bolt and nut in the bottom hole only.
3
Repeat Steps 1 & 2 for the door
track on the front of building, except
for the track supports, fasten as
shown.
STEP
3
 Parts Needed For 
(5)
STEP
Track Supports 6228
Gables/Braces
1
Gable
24
 Left Gable Assemblies (2)
 Right Gable Assemblies (2)
 6635 Gable Brace (2)
STEP
2
6635 Gable Brace