Advertisement
Self-Generating Steam Jacketed Counter Tilting Kettles
Operation
Tilting Instructions
Your kettle has the standard "Clean Lock" feature and may not be tilted without disengaging the tilt knob located
on the console at the top right. This feature locks the kettle in the upright position and also allows the operator
to lock the kettle at 105 degrees for ease of cleaning. To tilt the kettle the full distance, the tilt lock knob must be
disengaged from the cleaning position by pulling out the tilt lock knob and tilting the kettle forward the full distance.
Follow these steps to tilt kettle:
1. Pull out the tilt knob near top right of console.
2. Using kettle tilt handle pull kettle forward to desired angle of pour or until kettle locks at 105 degrees. The tilt knob
can be released after the kettle has been tilted approximately 10̊ .
3. Kettle will lock in position at 105 degrees and may be tilted further by pulling the tilt lock knob a second time allowing
the kettle to tilt the full distance.
4. To return the kettle to the upright position, pull out the tilt lock knob and tilt the kettle upward until it locks in the upright
position. The kettle should not move in either direction once in the upright position.
INSTALLATION & OPERATION MANUAL 10121 REV 0 (04/21)
O
PERATION
7
PAGE
OF20
Advertisement
