Page 1
Serial #: ___________________________ Date Purchased: _____________________ Installation & Operation Manual Electric Tilt Skillets ETS-30 & ETS-40 Model ETS WARNING Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.
Electric Tilting Skillets Table of Contents RETAIN THIS MANUAL FOR FUTURE REFERENCE. Table of Contents Important Notes For Installation and Operation ..............2 Service Connections ......................4 Installation ..........................5 Operation ..........................6 Cleaning ..........................7 Cooking Guidelines ....................... 8 Maintenance .........................
ETS-40 40 Gallon 152 Liter ETS-40 547 lbs. (248 kg) BACK 6” (152) As continued product improvement is a policy of Crown, specifications are subject to change without notice. PAGE OF 12 INSTALLATION & OPERATION MANUAL 10089 REV 4 (09/22)
Before installing, verify that the electrical service agrees with the specifications on the rating plate located on the left side panel as you face the front of the braising pan. If the supply and equipment requirements do not agree, contact your dealer or Crown Food Service Equipment Ltd. Installation Instructions Set skillet in place and level appliance using spirit level.
Operation Electric Tilting Skillets Operation Ensure the power supply is connected to unit and that circuit breakers are on. Tilt skillet to ascertain that it moves easily. Turn handle as far as it will go and return to upright position. Turn power switch “ON”.
Electric Tilting Skillets Cleaning Cleaning WARNING Disconnect the power supply to the appliance before cleaning or servicing. WARNING Never spray water into electric controls or components! WARNING The equipment and its parts are hot. Use care when operating, cleaning and servicing. CAUTION Do not use cleaning agents that are corrosive.
Electric Tilting Skillets Maintenance Maintenance NOTICE Contact the factory, the factory representative or a local service company to perform maintenance and repairs. WARNING The tilting braising pan and its parts are hot. Use care when operating, cleaning and servicing the tilting braising pan. WARNING Disconnect electrical power supply and place a tag at the disconnect switch to indicate that you are working on the circuit before performing any maintenance.
Page 12
Electric Power Tilt Skillets A product with the Crown name incorporates the best in durability and low maintenance. We all recognize, however, that replacement parts and occasional professional service may be necessary to extend the useful life of this appliance.