Playing Back a Tape
Playback
If the playback picture is distorted, clean the video heads using a Canon Head Cleaning
Cassette or a commercially available digital video head-cleaning cassette (
1. Holding the lock button on the
switch pressed down, set
the switch to PLAY.
2. Set the TAPE/CARD switch to
3. If the joystick guide does not
appear on screen, press (
display it.
4. Push the joystick (
to rewind the tape.
5. Push the joystick (
/
to play back the tape.
Push (
) again to pause the playback.
6. Push the joystick (
to stop the playback.
To use the viewfinder, close the LCD panel.
About the screen display: During playback, the time code gives the hours,
minutes, seconds and frames. The remaining tape time may not appear when
the time left is less than 15 seconds.
38
.
) to
) towards
) towards
) towards
120).