Playing Back A Tape - Canon MVX1i Instruction Manual

Playing Back a Tape

Playback
If the playback picture is distorted, clean the video heads using a Canon Head Cleaning
Cassette or a commercially available digital video head-cleaning cassette (
1. Holding the lock button on the
power switch pressed down, set
the switch to PLAY.
2. Set the TAPE/CARD switch to
3. Press the
the tape.
4. Press the
playback.
5. Press the
playback.
To use the viewfinder, close the LCD panel.
About the screen display: During playback, the time code gives the hours,
minutes, seconds and frames. The remaining tape time may not appear when
the time left is less than 15 seconds.
To display the audio level at the time of recording, press the AUDIO LEVEL
button during playback.
34
button to rewind
/ button to begin
button to stop
.
136).