Canon Elura 100 Instruction Manual page 105

Operation may not work correctly depending on the software and the
specifications/settings of your computer.
If the computer freezes while you have connected the camcorder, disconnect
and reconnect the DV cable. If the problem persists, disconnect the DV cable,
E
turn off both the camcorder and the computer and then turn them back on and
reconnect them.
Before connecting the camcorder to the computer using a DV cable make sure
that camcorder and computer are not connected with a USB cable, and that no
other IEEE1394 device is connected to the computer.
Depending on the video editing software you use, you may need to set the
switch of the camcorder to a mode other than PLAY. Refer also to the
instruction manual of the editing software.
We recommend powering the camcorder from a household power source while
it is connected to the computer.
Refer also to the instruction manual of the computer.
The programs ZoomBrowser EX and Image Browser included with the supplied
CD-ROM are intended for use only with images recorded on the memory card.
Video recordings on the tape cannot be transferred to the computer using the
software included with the supplied CD-ROM.
105