Canon Elura 100 Instruction Manual page 68

DISPLAYS: Shows the displays on the screen during playback.
When set to [OFF<PLAYBK>]:
- Displays, except for the data code, disappear (however, the displays during the
magnification of the playback image and the activation of the digital effects, as well as
the FUNC. menu will still appear).
- Tape operation displays appear for approximately 2 seconds.
- Displays also disappear from the connected TV, except for some warning messages.
6SEC. DATE: The camcorder displays the date and time for 6 seconds when you begin
playback, or to indicate that date or time zone has changed.
The 6-second auto date appears even if [DISPLAYS] is set to [OFF<PLAYBK>].
LEVEL MARKER: A horizontal guide line will appear at the center of the screen. You can
better frame the picture better by referring to the level marker.
DEMO MODE: The demonstration mode displays the camcorder's main features. It starts
automatically when you leave the camcorder turned on without loading a recording media
for more than 5 minutes using the power adapter.
To cancel the demo mode once it has begun, press any button, turn off the camcorder
or load a recording media.
SYSTEM SETUP
Menu Items
WL. REMOTE
BEEP
START-UP IMG ON, OFF
POWER SAVE
FILE NOS.
WL. REMOTE: Sets the camcorder to be operated with the wireless controller.
BEEP: A beep sounds upon operations such as turning on the camcorder, during self-
timer countdown or warnings such as condensation.
START-UP IMG: Sets whether the Canon logo will be displayed or not when you turn on
the camcorder.
POWER SAVE: When powered by a battery pack, the camcorder shuts off to save power
if left without any operation for 5 minutes. Approximately 30 seconds before the
camcorder shuts off the message "
FILE NOS.: Select the file numbering method upon inserting a new memory card.
Images are automatically assigned file numbers from 0101 to 9900, and stored in
folders containing up to 100 images. Folders are numbered from 101 to 998.
[RESET]: The file number starts at 101-0101. If the memory card already contains
images files, the consecutive file number will be assigned.
68
Setting Options
ON, OFF
HIGH VOLUME, LOW VOLUME, OFF
ON, OFF
RESET, CONTINUOUS
AUTO POWER OFF" will appear.
-
-
-
-
-