List Of Messages - Canon Elura 100 Instruction Manual

List of Messages

Message
SET THE TIME ZONE,
DATE AND TIME
CHANGE THE BATTERY
PACK
THE TAPE IS SET FOR
ERASURE PREVENTION
REMOVE THE
CASSETTE
CHECK THE INPUT
CONDENSATION HAS
BEEN DETECTED
CONDENSATION HAS
BEEN DETECTED
REMOVE THE
CASSETTE
TAPE END
INCORRECT TAPE
SPECIFICATION
INCORRECT TAPE
SPECIFICATION
PLAYBACK IS
RESTRICTED
INPUT SIGNAL NOT
SUPPORTED
CHECK THE CASSETTE
[REC MODE]
CHECK THE CASSETTE
[AUDIO MODE]
CHECK THE CASSETTE
[BLANK]
HEADS DIRTY, USE
CLEANING CASSETTE
COPYRIGHT PROTECTED
PLAYBACK IS RESTRICTED
COPYRIGHT
PROTECTED DUBBING
RESTRICTED
Memory Card Related Messages
Message
NO CARD
NO IMAGES
CARD ERROR
114
You have not set the time zone, date and time. This message
appears each time you turn the power on until you set the time
zone, date and time.
Battery pack is exhausted. Replace or charge the battery pack.
Cassette is protected. Replace the cassette or change the
position of the protect switch.
Camcorder stopped operating to protect the tape. Unload and
reload the cassette.
DV cable is not connected, or the connected digital device is
turned off.
Condensation has been detected in the camcorder.
Condensation has been detected in the camcorder. Unload the
cassette.
Tape reached the end. Rewind the tape or replace the cassette.
You attempted to perform audio dubbing on a tape recorded in
HDV standard.
You attempted to play back a tape recorded in HDV standard.
You attempted to input video signal in HD standard through the
DV terminal.
You attempted to perform audio dubbing on a tape recorded in a
mode other than the SP mode.
You attempted to perform audio dubbing on a tape recorded in 16-
bit or 12-bit 4-channel sound.
You attempted to perform audio dubbing on a tape with a blank
section.
Video heads are dirty. Clean the video heads.
You attempted to play back a copyright protected tape.
You attempted to dub a copyright protected tape. May also appear
when an anomalous signal is received during analog line-in
recording.
Memory card not is inserted into the camcorder.
No images are recorded on the memory card.
A memory card error occurred. The camcorder cannot record or
play back the image.
The error may be temporary. If the message disappears after 4
seconds " " flashes red, turn the camcorder off, remove the
card and reinsert the card. If "
continue recording/playback.
Explanation
Explanation
" changes to green, you can
26
16
118
19
90
113
113
–
–
–
-
94
94
94
120
91
91
20
–
–