Turning On Analog-Digital Converter - Canon Elura 100 Instruction Manual

Turning On the Analog-Digital Converter
Available only in the
MENU
( 64)
1. Open the FUNC. menu, select (
2. Select ( ) the [VCR SETUP] menu and press (
the [AV DV] option and press (
3. Set it to [ON] and press (
Depending on the signal sent from the connected device, the conversion from
analog to digital signals might not work properly (e.g., signals that include
copyright protective signals or anomalous signals such as ghost signals).
For normal use, set [AV
be input via the camcorder's DV terminal.
We recommend powering the camcorder from a household power source.
Connecting the camcorder to the computer you can also use the analog-digital
conversion to transfer analog recordings to your computer as digital signals.
The required equipment and operation is the same as when Transferring Video
Recordings to a Computer (
[AV DV] to [ON]. Check the setting before connecting the camcorder to the
computer.
The analog-digital conversion may not operate properly depending on the
software and the specifications and settings of your computer.
mode.
VCR SETUP
) to save the changes, then close the menu.
DV] to [OFF]. If it is set to [ON], digital signals cannot
104), except for step 3: In this case set the
AV DV OFF
) the icon and press (
). Then, select (
).
E
).
)
93