Canon Elura 100 Instruction Manual page 116

Message
PRINTER ERROR
PRINT ERROR
HARDWARE ERROR
COMMUNICATION
ERROR
CHECK PRINT
SETTINGS
PRINTER IN USE
PAPER LEVER ERROR
PRINTER COVER OPEN
NO PRINTHEAD
116
Cancel printing. Turn off the printer and turn it back on. Check the printer
status. If the error persists, consult your dealer or a Canon Service
Center listed in the Contact List provided with the printer or the printer
manual.
Cancel printing, disconnect the USB cable and turn off the printer. After a
while, turn the printer back on and reconnect the USB cable. Check the
printer status. If the error persists, consult your dealer or a Canon
Service Center listed in the Contact List provided with the printer or the
printer manual.
When you are printing using the
Refer to the printer's manual to solve the problem. If the printer is
equipped with a battery, it might be exhausted. In such case, turn off the
printer, replace the battery and turn it back on. If the error persists,
consult your dealer or a Canon Service Center listed in the Contact List
provided with the printer or the printer manual.
The printer is experiencing a data transmission error. Cancel printing,
disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable. When you are printing
using the button, check the print settings.
Or, you attempted to print from a memory card that contains a large
number of images. Reduce the number of images.
The print setting cannot be used for printing with the
The printer is in use. Check the printer status.
Paper lever error occurred. Adjust the paper selection lever to the proper
position.
Close the printer cover securely.
No print head is installed in the printer or print head is defect. Refer to the
instruction manual of your printer.
Explanation
button, check the print settings.
button.