Selecting The Drive Mode - Canon Elura 100 Instruction Manual

Selecting the Drive Mode

Single
Continuous Shooting
High-Speed Continuous
Shooting
AEB
(Auto Exposure Bracketing)
Self-timer
Changing the Drive Mode
Available only in the
1. Set the mode switch to
2. Open the FUNC. menu and select (
3. Select (
Continuous Shooting/High-Speed Continuous Shooting
1. Press the PHOTO button halfway.
2. Press and hold the PHOTO button fully.
A series of still images will be recorded as long as you hold the PHOTO button.
Maximum number of continuous shots at one time:
Still Image Size
L 1152 x 864
S 640 x 480
These figures are approximate and vary with the recording conditions and subjects.
Sufficient space on the memory card is required. Continuous shooting stops when
card is full.
The number of frames per second will be lower when "
warning) is displayed on the screen.
80
Records a single still image when you press the
PHOTO button.
Captures a quick series of still images while you press
the PHOTO button. For the number of frames per
second, refer to the table on the next page.
The camcorder records a still image in three different
exposures (dark, normal, light in 1/2 EV steps),
allowing you to choose the shot you like the best.
Records a still image after a self-timer delay (
mode.
.
) a setting option and close the menu.
Frames per Second
Normal speed
3.0 frames
3.0 frames
PHOTO button
Joystick
FUNC. button
Mode switch
) the drive mode icon.
Maximum Number of
Continuous Shots
High speed
5.0 frames
5.0 frames
" (camcorder shake
52).
10 images
60 images