Honeywell HUS-NVR-1032/6032-E User Manual page 92

System Operation and Configuration
84
Figure 5-113 Before Combine
2. Click Combine and the following window is displayed:
Figure 5-114 Combine Virtual Disk
3. Input the name of the new virtual disk and click OK, then the following window is
displayed:
Figure 5-115 Warning
4. Click OK and a pop-up window will tell if the operation is successful. If suceeded, click
OK to return to the list of "Storage" and the information of the combined virtual disks is
displayed in the list, as shown below: