Honeywell HUS-NVR-1032/6032-E User Manual page 91

Figure 5-110 Configure Disks (Virtual Disk) 1
2. Click to divide the target virtual disk into two or more virtual disks. The disk's name,
channel and stream can be set as shown below:
Figure 5-111 Configure Disks (Virtual Disk) 2
3. After that, click OK and a pop-up window will tell if the configuration succeeded. If
succedded, click OK to return to the list of "Storage". The following window displayed
the informaiton of the newly-configured virtual disk:
Figure 5-112 Configuration Done
Configure other storage devices (disk or eSATA) according to the above steps.
Combine
To perform the operation of "Combine", you must choose the virtual disks
with the same RAID type.
1. Select the to-be-combine virtual disks in the list of "Storage", as shown below:
83