Honeywell HUS-NVR-1032/6032-E User Manual page 90

System Operation and Configuration
82
Input the new RAID name and click OK to save it.
Delete RAID
To delete a RAID, select the target RAID in the RAID list and click Delete, then the following
window is displayed:
Figure 5-108 Delete RAID
Click OK to delete the RAID.
Deleting the RAID will erase all the data on it.
Storage Management (Model 6032)
Note: A corresponding virtual disk will be automatically generated after a new RAID is built.
Click the tab of "Storage Mgmt." and the following window is displayed, including all physical
disks (excl. RAID disk) and virtual disks.
Figure 5-109 List of Storage (Model 6032)
Configuration
Take configuring the virtual disk as example.
1. Select the target virtual disk in the list of "storage" and click Configure, then the
following window is displayed: